Access Control Alarm Systems Camera Surveillance Intercom Systems Monitoring Services GPRS/GSM Monitoring Digital Video Recorders
Find a Bollard Stainless Steel Steel Aluminuim Plastic Pre-cast Concrete Timber Lighting
Contact Us Disclaimer
Titan Electrical Power & Water Bollards

The Titan Electrical / power Bollards are designed for use with Clipsal 56 series switch gear & are supplied with galvanised pre-punched mounting plates to take 2,4,6 & 8 standard mounting enclosures.
All power / water accessories are not included & must be installed / supplied by your electrical contractor.
Electrical installation must be carried out by a licensed electrical contractor, to comply with SAA wiring rules (AS3000) & any additional requirements of statutory authorities.

Material


200NB (219.1) x 4.8mm / 300NB (323.9) x 6.4mm Medium Duty Galvanised Pipe

Finish

Electrostatically powder coated in a range of colours (See Dulux Powdercoating Colour chart)

Options

Use as secure power & water service provider or water only
Most commonly installed in outdoor parks, civic plaza’s, outdoor area’s at sporting complexes, gold courses, farmers markets and local council markets in general. The basic need to have power, water or both distributed from the bollard is met . Power and water distribution can be secured both when in use and not in use. The doors on the bollard have a small gap on the underside so users can unlock the door, plug in for power for example and lock the door. This is an important security and safety requirement.

We can also supply these as a Hot Dip Galvanised product. (please specify this when ordering)





 Code  Wall  SIZE  Security Class  Type
 TPB103B - 200NB
1 FIXED IN SITU
 TPB30B -
300NB 1 FIXED IN SITU
 TPWB30B
-
300NB
1
FIXED IN SITU
 STPB103PBA A 200NB 1 FIXED IN SITU
 STPB103PBB B 200NB FIXED IN SITU
 STPB60B -
600NB
1
FIXED IN SITU
 TPB60B - 600NB 1  FIXED IN SITU

Dimentions of Mounting Plate. (for electrical gear added by your electrician)

Model: TPB103B  - 3.0mm thick galvanised mounting plate (internal) 150mm Width x 450mm Height

Model: TPB30B - 3.0mm thick galvanised mounting plate (internal) 195mm Width x 450mm Height - Designed for Clipsal Series 56 Gear, however other hardware may be added as required.

Both models have a lockable front door.









Powered by CubeCart
Copyright Devellion Limited 2006. All rights reserved.
Australian Lingerie Shop - Plus Size Lingerie in Stock